Authoring Techniques for Accessible Office Documents: Word 2007 | Accessible Digital Office Document (ADOD) Project

Quick Reference

Technique 1. Use Accessible Templates

All office documents start with a template, which can be as simple as a blank standard-sized page or as complex as a nearly complete document with text, graphics and other content. For example, a "Meeting Minutes" template might include headings for information relevant to a business meeting, such as "Actions" above a table with rows to denote time and columns for actions of the meeting.

Because templates provide the starting-point for so many documents, accessibility is critical. If you are unsure whether a template is accessible, you should check a sample document produced when the template is used (See Accessibility Checking, below).

Word 2007’s default template for new documents is a blank page. The basic installation also includes blank business card, blank label templates, and other blank office-related documents. These are all accessible by virtue of being blank.

It is possible to create your own accessible templates from scratch in Word 2007. As well, you can edit and modify the existing prepackaged templates, ensuring their accessibility as you do so and saving them as a new template.

To create an accessible template

Create a new document (from the default blank template or from one of the prepackaged templates)
Ensure that you follow the techniques in this document
When you are finished you should also check the accessibility of the document (See Technique 10, below)
Go to menu item: Office > Save As > Word Template
Save the template in the Microsoft > Templates folder
In the File name box, type a name for the template. Using a descriptive File name (e.g., "Accessible Memo Template") may increase the prominence of the accessibility status. As well, filling in the text box labeled Tags with the term "accessibility" may improve its searchability as an accessible file.
Select Save

To select an accessible template

Note: Only use these steps if you have an accessible template available (e.g. that you previously saved). Otherwise, simply open a new (blank) document.

Go to menu item: Office > New
Under Templates, select My templates…
In the New document dialog, select your accessible template from the list in the My Templates tab
Select OK
A new document based on the template will be displayed. If you have chosen an accessible template, the document will be accessible at this point. As you add your content (e.g., text, images, etc.), ensure that you consult the sections that follow to preserve accessibility.

Technique 2. Specify Document Language

In order for assistive technologies (e.g., screen readers) to be able to present your document accurately, it is important to indicate the natural language of the document. If a different natural language is used for a paragraph or selected text, this also needs to be clearly indicated.

To change the default language

In the operating system, activate the keyboard layout for the language in which you want to create and edit text
Right-click* the status bar at the bottom of the window, ensure that Language is selected, this displays a reminder of the active keyboard layout in the status bar

Word 2007 has an automatic language detection mechanism, which can automatically detect the language of your text. If you type a section of text in a different language than the rest of your document, Word 2007 will programmatically mark the language of that section of text appropriately.

To turn on automatic language detection

Go to menu item: Review
In the Proofing section, select the Set Language button
In the Language dialog, select the Detect language automatically check box

To apply a language directly to selected text

Select the text
Go to menu item: Review
In the Proofing section, select the Set Language button
In the Mark selected text as box, select the language from the list
Select OK

Technique 3. Provide Text Alternatives for Images and Graphical Objects

When using images or other graphical objects, such as charts and graphs, it is important to ensure that the information you intend to convey by the image is also conveyed to people who cannot see the image. This can be accomplished by adding concise alternative text to of each image. If an image is too complicated to concisely describe in the alternative text alone (artwork, flowcharts, etc.), provide a short text alternative and a longer description as well.

Tips for writing alternative text

Try to answer the question "what information is the image conveying?"
If the image does not convey any useful information, leave the alternative text blank
If the image contains meaningful text, ensure all of the text is replicated
Alternative text should be fairly short, usually a sentence or less and rarely more than two sentences
If more description is required (e.g., for a chart or graph), provide a short description in the alternative text (e.g., a summary of the trend) and more detail in the long description, see below
Test by having others review the document with the images replaced by the alternative text

Tips for writing longer descriptions

Long descriptions should be used when text alternatives (see above) are insufficient to answer the question "what information is the image conveying?"
In some situations, the information being conveyed will be how an image looks (e.g., an artwork, architectural detail, etc.). In these cases, try to describe the image without making too many of your own assumptions.
One approach is to imagine you are describing the image to a person over the phone
Ensure that you still provide concise alternative text to help readers decide if they are interested in the longer description

Alternatively, you can include the same information conveyed by the image within the body of the document, providing the images as an alternate to the text. In that case, you do not have to provide alternate text within the image.

To add alternative text to images and graphical objects

Right-click* the object
Select Size…
Select the Alt Text tab in the Size dialog
Fill in the Alternative Text
Select Close

When inserting a very small image, or resizing a larger image to be much smaller, Word 2007 assumes that the image is intended to be a bullet-point for a bulleted list. Once Word 2007 defines the image as a bullet, the option to add alternative text disappears. Select Undo, to redefine the bullet as an image. When you right-click* the image, select Format Picture… and select the Alt Text tab in the Format Picture dialog. Alternative text can be found, or can be entered, into the Alternative text box.

Technique 4. Avoid "Floating" Elements

When images and objects are inserted into Word 2007 documents they default to being an "inline object". Inline objects keep their position on the page relative to a portion of the text. A "floating" object keeps its position relative to the page, while text flows around it. As content moves up or down on the page, the object stays where it was placed. To ensure that images and objects remain with the text that references it, always position it as an inline object.

Similarly, avoid placing drawing objects directly into the document (e.g., as borders, to create a diagram). Instead, create borders with page layout tools and insert complete graphical objects.

To prevent an image or object from "floating"

Select the object
Go to menu item: Page Layout
Select Position from the Arrange section
Select In Line with Text

Technique 5. Use Headings

Any documents that are longer than a few paragraphs require structuring to make them more straightforward for readers to understand. One of the easiest ways to do this is to use "True Headings" to create logical divisions between paragraphs. True headings are more than just bolded, enlarged, or centered text; they are structural elements that order and levels provide a meaningful sequence to users of assistive technologies.

Tips for headings

Use the default headings styles provided ("Heading ", "Heading 2", etc.)
Nest headings properly (e.g., the sub-headings of a "Heading 1" are "Heading 2", etc.)
Do not skip heading levels

To apply headings using the Styles toolbar

Select text
Go to menu item: Home
In the Styles section, select the heading you wish to apply
Note: You can scroll through the multiple heading styles using the arrows on the right side of the Styles section. You can also change the Style design by selecting the Change Styles button on the right.

To modify heading styles

Go to menu item: Home
In the Styles section, right-click* the style you wish to use from the Styles Gallery
Select Modify
In the Modify Style dialog, make the appropriate changes to style characteristics
Select OK

To return to the default heading styles

Go to menu item: Home
In the Styles section, select Change Styles
Select Style Set
Select Word 2007 from the list

Technique 6. Use Built-In Document Structuring Features

6.1 Tables

When using tables, it is important to ensure that they are clear and appropriately structured. This helps all users to better understand the information in the table and allows assistive technologies (e.g., screen readers) to provide context so that the information within the table can be conveyed in a meaningful way.

Tips for tables

Only use tables for tabular information, not for formatting, such as to position columns.
Use "real tables" rather than text formatted to look like tables using the TAB key or space bar. These will not be recognized by assistive technology.
Keep tables simple by avoiding merged cells and dividing complex data sets into separate smaller tables, where possible. Whenever possible, use just one row of headings.
If tables split across pages, set the header to show at the top of each page. Also set the table to break between rows instead of in the middle of rows.
Create a text summary of the essential table contents. Any abbreviations used should be explained in the summary.
Table captions or descriptions should answer the question "what is the table's purpose and how is it organized?" (e.g., "A sample order form with separate columns for the item name, price and quantity").
Table cells should be marked as table headers when they serve as labels to help interpret the other cells in the table.
Table header cell labels should be concise and clear.
Ensure the table is not "floating" on the page (see Technique 4).

To add a table with headings

Go to menu item: Insert
In the Tables section, select the Tables icon
Select the number of rows and columns you would like your table to have
Select the table and a Table Tools menu item should appear
Go to menu item: Table Tools > Design
In the Table Style Options section, select the Header Row check box

6.2. Lists

When you create lists, it is important to format them as "real lists". Otherwise, assistive technologies will interpret your list as a series of short separate paragraphs instead of a coherent list of related items.

To create an ordered or unordered list

Go to menu item: Home
In the Paragraph section, select the Bullets icon for unordered lists or select the Numbering icon for ordered lists
To choose a different list format, select the arrow beside the icon
Select a format from the format Library that appears in the drop-down menu

To modify list styles

Go to menu item: Home
In the Paragraph section, select the arrow beside the Bullets icon for unordered lists or select the arrow beside the Numbering icon for ordered lists
Select Define New Bullet… to create a new unordered list format
Select Define New Number Format… to create a new ordered list format
In the New Bullet dialog or the New Number Format dialog, select the list characteristics
Select OK

6.3 Columns

Use Columns feature for placing text in columns. However, because columns can be a challenge for users of some assistive technologies, you should consider whether a column layout is really necessary.

6.4 Page Breaks

Start a new page by inserting a page break instead of repeated hard returns.

6.5 Use a Table of Contents

Creating an index or table of contents to outline office document content can provide a means of navigating the meaningful sequence of content.

The best way to generate a table of contents is after applying the predefined heading styles, such as "Heading 1" as described above, to the headings that you want to include in your table of contents. After you apply these styles, you can then create a table of contents.

To insert a table of contents

Place the cursor in your document where you want to create the table of contents
Go to menu item: References
In the Table of Contents section, select Table of Contents
Select the style that you want to use

To update a table of contents

Select the table
Go to menu item: References
In the Table of Contents section, select the Update Table button

6.6 Use Page Numbering

Numbering the pages of your document helps those reading and editing your document effectively navigate and reference its content. For users of assistive technologies, it provides a valuable point of reference within the document.

To insert page numbers

Go to menu item: Insert
In the Header & Footer section, select Page Number
Select where you would like to insert your page numbers
Select the style of page number you would like to use

To format page numbers

Go to menu item: Insert
In the Header & Footer section, select Page Number
Select Format Page Numbers…
In the Page Number Format dialog, select the page format characteristics you would like to use
Note: These changes are applied to the predefined page format styles. It does not create a new page format style.

6.7 Document Title

In case the document is ever converted into HTML, it should be given a descriptive and meaningful title.

To change the title of the current document

Go to menu item: Office > Prepare > Properties
In the Document Properties section that appears, select the Title text box
Enter the Title
Note: The Title defined in the properties is different than the file name. It is also unrelated to the template name, discussed above.

Technique 7. Create Accessible Charts

Charts can be used to make data more understandable for some audiences. However, it is important to ensure that your chart is as accessible as possible to all members of your audience.

All basic accessibility considerations that are applied to the rest of your document must also be applied to your charts and the elements within your charts. For example, use shape and color, rather than color alone, to convey information.
- When creating line charts, use the formatting options to create different types of dotted lines to facilitate legibility for users who are color blind.
- When creating bar charts, it is helpful to apply textures rather than colors to differentiate the bars
Ensure that the contents are your chart are appropriate labeled to give users reference points that will help them to correctly interpret the information.
Use the formatting options to change predefined colors, ensuring that they align with sufficient contrast requirements (see Technique 9.2)
Consider providing the data that you used to create the chart in tabular form (e.g. as an appendix).

Technique 8. Make Content Easier to See

Here are some other things to keep in mind:

8.1 Format of Text

When formatting text, especially when the text is likely to printed, try to:

Use font sizes between 12 and 18 points for body text.
Use fonts of normal weight, rather than bold or light weight fonts. If you do choose to use bold fonts for emphasis, use them sparingly.
Use standard fonts with clear spacing and easily recognized upper and lower case characters. Sans serif fonts (e.g., Arial, Verdana) may sometimes be easier to read than serif fonts (e.g., Times New Roman, Garamond).
Avoid large amounts of text set all in caps, italic or underlined.
Use normal or expanded character spacing, rather than condensed spacing.
Avoid animated or scrolling text.

But can’t users just zoom in?Office applications do typically include accessibility features such as the ability to magnify documents and support for high contrast modes. However, because printing is an important aspect of many workflows and changing font sizes directly will change documents details such the pagination, the layout of tables, etc., it is best practice to always format text for a reasonable degree of accessibility.

To change the text size for a default named style

Go to menu item: Home
In the Styles section, right-click* the Style you wish to modify
Select Modify Style
Under Formatting in the Modify dialog box, select the appropriate font size
Exit with OK

8.2 Use Sufficient Contrast

The visual presentation of text and images of text should have a contrast ration of at least 4.5:1. To help you determine the contrast, here are some examples on a white background:

Very good contrast (Foreground=black, Background=white, Ratio=21:1)
Acceptable contrast (Foreground=#767676, Background=white, Ratio=4.54:1)
Unacceptable contrast (Foreground=#AAAAAA, Background=white, Ratio=2.32:1)

Also, always use a single solid color for a text background rather than a pattern.
In order to determine whether the colors in your document have sufficient contrast, you can consult an online contrast checker, such as:

8.3 Avoid Using Color Alone

Color should not be used as the only visual means of conveying information, indicating an action, prompting a response, or distinguishing a visual element. In order to spot where color might be the only visual means of conveying information, you can create a screenshot of the document and then view it with online gray-scale converting tools, such as:

GrayBit v2.0: Grayscale Conversion Contrast Accessibility Tool

8.4 Avoid Relying on Sensory Characteristics

The instructions provided for understanding and operating content should not rely solely on sensory characteristics such as the color or shape of content elements. Here are two examples:

Do not track changes by simply changing the color of text you have edited and noting the color. Instead use Word 2007’s "Track Changes" feature to track changes.
Do not distinguish between images by referring to their appearance (e.g. "the bigger one"). Instead, label each image with a figure number and use that for references.

8.5 Avoid Using Images of Text

Before you use an image to control the presentation of text (e.g., to ensure a certain font or color combination), consider whether you can achieve the same result by styling "real text". If this is not possible, as with logos containing stylized text, make sure to provide alternative text for the image following the techniques noted above.

Technique 9. Make Content Easier to Understand

9.1 Write Clearly

By taking the time to design your content in a consistent way, it will be easier to access, navigate and interpret for all users:

Whenever possible, write clearly with short sentences.
Introduce acronyms and spell out abbreviations.
Avoid making the document too "busy" by using lots of whitespace and by avoiding too many different colors, fonts and images.
If content is repeated on multiple pages within a document or within a set of documents (e.g., headings, footings, etc.), it should occur consistently each time it is repeated.

9.2 Provide Context for Hyperlinks

Hyperlinks are more effective navigation aids when the user understands the likely result of following the link. Otherwise, users may have to use trial-and-error to find what they need.

To help the user understand the result of selecting a hyperlink, ensure that the link makes sense when read in the context of the text around it. For example, while it would be confusing to use "more information" as a link by itself on a page, it would be fine to use "more information" as a link in the following sentence: "The airport can be reached by taxi or bus (more information)."

To make the address of hyperlink clear when printing, you may wish to include the address in brackets following the descriptive text of the hyperlink.

To add hyperlinks with meaningful text

Type (or paste in) a web address and press spacebar or "Enter" to convert into a hyperlink
Select the link and right-click*
Select Edit Hyperlink (Ctrl + K)
Edit the text in the Text to display box

Technique 10. Check Accessibility

At this time, Word 2007 does not offer a mechanism to check for potential accessibility errors in your document prior to publishing. [Tested: January 10th, 2011]

Technique 11. Use Accessibility Features when Saving/Exporting to Other Formats

In some cases, additional steps must be taken in order to ensure accessibility information is preserved when saving/exporting to formats other than the default.

PDF

PDF documents are not always accessible. Accessible PDF documents are often called "Tagged PDF" because they include "tags" that encode structural information required for accessibility. To evaluate the accessibility of your PDF document, see Technique 11 (above).

Make sure the file is saved as a DOCX (Older DOC files are not compatible with the checker).
Go to menu item: Office > Save As > PDF or XPS
In the File name box, type a name for the file
Select the Options button
Under Include non-printing information, ensure that the Document structure tags for accessibility check box is selected
Under PDF options, ensure that Bitmap text when fonts may not be embedded check box is de-selected
Select OK and Save

HTML

Go to menu item: Office > Save As > Other Formats
In the File name box, type a name for the file
In the Save as type box, select Web Page
Select Save
Check the HTML file for accessibility (see Technique 10, above)

To clean up your HTML file

Remove unnecessary styles, line breaks, etc.
Remove unnecessary id, class, and attributes
Remove font tags
Remove styles in the <head> tag
Ensure the <th> tags have a scope attribute
Remove <p> tags nested inside <th> and <td> tags
Check for accessibility (see Technique 10, above)
Note: you may wish to use HTML editors or utilities to help with this process.

Technique 12. Consider Using Accessibility Support Applications/Plugins

Disclaimer: This list is provided for information purposes only. It is not exhaustive and inclusion of an application or plug-in on the list does not constitute a recommendation or guarantee of results.

Accessibility Help

If you are interested in what features are provided to make using Word 2007 more accessible to users, documentation is provided in the Help system:

Select the Help icon from the right corner of the Toolbar or select F1
Enter "Accessibility" as your search term in the Help dialog box

Usage Notes

At the time of testing (January 10, 2011), Word 2007 provides a set of accessibility features that is sufficient to enable the production of accessible digital office documents. However, Word 2007 does not include an accessibility checking feature.

This guide is intended to be used for documents that are:

Intended to be used by people(i.e., not computer code),
Text-based (i.e., not simply images, although they may contain images),
Fully printable(i.e., where dynamic features are limited to automatic page numbering, table of contents, etc. and do not include audio, video, or embedded interactivity),
Self-contained (i.e., without hyperlinks to other documents, unlike web content), and
Typical of office-style workflows(Reports, letters, memos, budgets, presentations, etc.).

If you are creating forms, web pages, applications, or other dynamic and/or interactive content, these techniques will still be useful to you, but you should also consult the W3C-WAI Web Content Accessibility Guidelines (WCAG 2.0) because these are specifically designed to provide guidance for highly dynamic and/or interactive content.

File Formats

The default file format for Word 2007 is Office Open XML (DOCX).
In addition, Word 2007 offers many other word processor and web format saving options. Most of these have not been checked for accessibility.

Document Conventions

We have tried to formulate these techniques so that they are useful to all authors, regardless of whether they use a mouse. However, for clarity there are several instances where mouse-only language is used. Below are the mouse-only terms and their keyboard alternatives:

*Right-click: To right-click with the keyboard, select the object using the Shift+Arrow keys and then press either (1) the "Right-Click" key (some keyboard have this to the right of the spacebar) or Shift+F10.

Disclaimer and Testing Details

Following these techniques will increase the accessibility of your documents, but it does not guarantee accessibility to any specific disability groups. In cases where more certainty is required, it is recommended that you test the office documents with end users with disabilities, including screen reader users.
The application-specific steps and screenshots in this document were created using Microsoft Word 2007 (ver.12.0.6545.5000, Windows 7, Jan. 2011) while creating a DOCX document. Files are also easily saved as other file formats (see Technique 11, below).
This document is provided for information purposes only and is neither a recommendation nor a guarantee of results. If errors are found, please report them to: adod-comments@idrc.ocad.ca.

References and Resources

Microsoft Word 2007 Help

Acknowledgments

Authors: Jan Richards, Sabrina Ruplall

This document was produced as part of the Accessible Digital Office Document (ADOD) Project. This project has been developed by the Inclusive Design Research Centre, OCAD University as part of an EnAbling Change Partnership project with the Government of Ontario and UNESCO (United Nations Educational, Scientific and Cultural Organization).

Partner logos: UNESCO-United Nations Educational, Scientific and Cultural Organization, the Government of Ontario and the Inclusive Design Research Centre (OCAD University)

Accessible Digital Office Documents (ADOD) Project by Inclusive Design Research Centre (IDRC) is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.

Date of Current Version: 9 Dec 2014